General Purpose Motors
RANGE
LAWKIM has a wide range of motors ranging from 7 watts (0.009 HP) to 2250
watts (3 HP) in single phase designs and upto 1500 watts (2 HP) in three
phase designs. LAWKIM takes keen interest and pride in developing special
motors for customer should standard motor range not suffice.
STANDARDS
These motors conform to IS 996 and BS 5000 Part 11 for performance.
RATING
All standard motors are continuous rated to comply with performance
standards. Special motors for cyclic or short time duties can also be
offered against specific applications.
ENCLOSURES
LAWKIM offer following enclosures
- Drip Proof (DP)
- Totally Enclosed (TE)
- Totally Enclosed Fan Cooled (TEFC)
- Air Over Motors (AOM)
MOUNTINGS
Various types of mountings are available
- Foot
- Stator Pad
- Flange
- Foot cum Flange
- Endshield Pad
- Stud
- Special Mounting if required
BEARING &
LUBRICATION
Sleeve bearing motors are lubricated for life by using PermawickTM
Lubrication system. This can give 50,000 hours of operation without
lubrication at normal running. Ball Bearing motors use double shielded deep
groove bearings and are life lubricated. This offers you trouble free life.
CENTRIFUGAL
GEAR AND OPEN CIRCUIT SWITCH
Field proven centrifugal gear is used for trouble free operation. Open
circuiting switch has sintered contact/s consisting of silver alloy and
copper. These contacts have excellent antiweld properties and can safely
rupture heavy current.
ROTOR / SHAFTS
All shafts are made of ENS steel and ground to 10 micron accuracy.
All shafts are given anti rust treatment. Stainless steel shafts can also be
supplied if asked for.
APPLICATION
ENGINEERING
With special emphasis on customer satisfaction, LAWKIM can develop a motor
as per customer's application requirement.
TYPICAL APPLICATIONS
Domestic Pumps |
Vacuum Pumps |
Surgical Pumps |
Wet Grinders |
Domestic Flour Mills |
Sewing Machines |
Machine Tools |
Box Strapping Machines |
Floor Polishers |
Compressors |
Pouch Making Machines |
Printing Presses |
Sugar Cane Crushers |
Wood Working Machines |
Air Conditioners |
Package Air Conditioners |
Washing Machines |
Jewellery Making Machines |
Room Coolers |
Needle Vibrator |
|
HVAC
Motors Conforming to NEMA 42 and 48 frame
specially designed for HVAC & Windows/Split room air-conditioners, condenser
coolers and allied applications.
|
Optimized designs
give low temperature rise, quiet operation and energy efficiency, hence
saving power. |
|
Expert backup
provided for motor selection and qualification for specific application. |
|
Motors can be
specially designed to meet electrical and mechanical performance
criteria. |
|
Totally enclosed or
open design as per customer requirement. |
|
Die Cast
precision-machined aluminum end shield for accurate alignment of shafts
and bearings. |
|
Powder-coated shells
for good corrosion resistance. |
|
Motors either with
resilient base or with vibration isolation rubber rings as per customer
requirements. |
|
Manufactured in
state-of-the-art machines to have consistency. |
|
Permanent lubrication
for service life of 50000hrs of continuous operation. |
|
Use of Slingers to
avoid loss of lubrication oil. |
|
Motors are suitable
for extreme operating conditions of low temperature, high humidity,
dusty atmosphere & high ambient temperatures. |
|